拉絲輪轂的表面加工對紋路及光潔度的要求很高，這對輪轂拉絲修復設備提出了更高的要求。軟件結合數控拉絲技術，吸取輪轂拉絲機床的經驗，推出現適合28英寸以下拉絲輪轂修復的三探測系統輪轂拉絲機。該設備搭配三探測系統、切削快慢可調、床身加重是該系列輪轂拉絲機的主要特點，該機床具有操作簡單、無需編程、拉絲面紋路清晰、亮度高的特點。

輪轂拉絲機主要用途是對拉絲輪轂修復。輪轂拉絲系統，激光位移探頭測量曲線。曲線測量給輪轂修復的操作人員降低了要求，讓輪轂修復簡單化。

輪轂刮花有必要修復嗎？
這個問題很簡單，當然需要修復，下面來說說修復的必要性。
很多人都會覺得輪轂刮了一下，沒什么影響，不必修了，這樣真錯了。自己的車誰不愛惜？修車是毋庸置疑的，且不說美觀問題，輪轂劃痕而言，一般分為表面劃傷和輪轂邊緣劃傷，但是不管是哪種劃傷輪轂表面清漆是刮掉了一部分，輪轂表面清漆掉了，輪轂沒有了保護層，這樣長時間與外接空氣接觸會導致輪轂表面氧化腐蝕，一但傷到輪轂鋁合金本質的話，輪轂報廢不能用了。特別是邊緣刮傷不修復導致的腐蝕，會使輪轂輪胎結合不緊密，從而導致輪轂慢漏氣，影響安全使用。所以輪轂的修復還是必要的。
這樣輪轂修復的商機毋庸置疑了現在的車流量這么大，市場肯定是沒問題的，如果您是這個行業或者準備進入這個行業，買輪轂修復機還是要多家選擇這樣您用著也放心。 施諾依2008成立，到目前已有10年，我們注重品質，出廠前我們會將機器調試到使用狀態，確保您收到貨可以上手練習。售后服務自然也是不錯的，價格上也是比較合理的，期待與你的合作！


隨著人民生活水平的不斷提高，汽車的購買量一直在不斷增加，且現在拉絲輪轂不僅僅能在豪華車上見到，很多汽車品牌開始將它使用在普通的汽車上，拉絲輪轂隨處可見。我們都知道，在行駛過程中，汽車輪轂難免會受到損壞或摩擦，況且針對拉絲輪轂不是那么好修復，需要的設備和技術人員進行修復，自動拉絲機在輪轂拉絲修復測量入手，激光位移測量曲線降低了對人員性的要求。
The surface processing of drawing hub requires high grain and smoothness, which puts forward higher requirements for the repair equipment of drawing hub. The software combines with NC wire drawing technology and draws on the experience of hub wire drawing machine, and introduces a three-detection system hub wire drawing machine which is suitable for repairing wire drawing wheels below 28 inches. The main features of this series of hub wire drawing machines are that the equipment is equipped with three detection systems, the cutting speed is adjustable, and the bed is heavier. The machine has the characteristics of simple operation, no programming, clear drawing lines and high brightness.

The main purpose of hub drawing machine is to repair the hub. Hub wire drawing system, laser displacement probe measuring curve. Curve measurement reduces requirements for hub repair operators and simplifies hub repair.

Is it necessary to repair hub scratches?
The problem is very simple. Of course, it needs to be repaired. Here's the necessity of repairing.
Many people will feel that the hub scraped, no impact, no need to repair, this is really wrong. Who does not cherish his own car? There is no doubt that car repair is a problem, and not to mention aesthetic problems. Hub scratches are generally divided into surface scratches and hub edge scratches. However, no matter what kind of scratched hub surface varnish is scratched off, the hub surface varnish is removed, and the hub has no protective layer. Such a long time of contact with the outside air will lead to oxidative corrosion of the hub surface, but it will damage the essence of aluminum alloy hub. If the hub is scrapped, it can't be used. Especially the corrosion caused by the non-repair of edge scratches will make the hub tyres not tightly bonded, which will lead to the slow air leakage of the hub and affect the safe use. So it is necessary to repair the hub.
So the business opportunity of hub repair is undoubtedly so large that the market is no problem. If you are in this industry or ready to enter this industry, you still need to buy a number of choices so that you can rest assured. Schnoy was established in 2008. It has been 10 years now. We pay attention to quality. Before leaving the factory, we will debug the machine to the working state to ensure that you can practice when you receive the goods. After-sales service is also good, and the price is reasonable. I look forward to cooperating with you!


With the continuous improvement of people's living standards, the purchase of automobiles has been increasing, and now the drawing hub can not only be seen in luxury cars, many automotive brands began to use it in ordinary cars, drawing hub can be seen everywhere. We all know that in the course of driving, automobile hub will inevitably be damaged or frictioned. Moreover, for the wire drawing hub is not so good to repair, professional equipment and technicians are needed to repair it. Auto-drawing machine starts with the repair measurement of wheel hub wire drawing. Laser displacement measurement curve reduces the professional requirements for personnel.

查看全部介紹